Burr polishing machine is a common mechanical equipment, widely used in the field of metal processing and surface treatment. It can remove burrs from the metal surface and improve the finish and quality of the surface. The following I will detail the use of burr polishing machine and precautions.

First, use method:

1. Preparation:

First of all, ensure that the work site is clean and tidy to avoid debris accumulation and blockage. Then, check whether the parts and accessories of the burr polishing machine are intact, and carry out the necessary maintenance and maintenance.

2. Install the device:

Place the burr polisher on the work table and fix the base to ensure that the equipment is stable and reliable. Connect the power supply and check whether the power cable is properly grounded.

3. Adjust equipment:

According to the size and needs of the workpiece, the appropriate grinding wheel and sandpaper are selected and installed on the spindle of the polishing machine. Adjust the table height of the polishing machine and the position of the polishing head to ensure that the distance between the workpiece and the grinding wheel is appropriate.

4. Perform operations:

First place the workpiece on the workbench, and adjust the Angle and position of the workpiece. Then, start the polishing machine and adjust the appropriate speed and feed speed. Gently push the workpiece with the hand to make it contact with the grinding wheel and start polishing. In the polishing process, keep the hand stable, evenly push the workpiece, and pay attention to the state of the machined surface.

5. Confirm the effect:

After finishing polishing, stop the operation of the polishing machine, observe the surface of the workpiece, and confirm that the burrs are removed and the surface finish meets the requirements.

Ii. Precautions:

1. Safe operation:

When using the burr polishing machine, you must wear appropriate protective glasses, gloves, masks and other personal protective equipment to ensure personal safety. Avoid sudden start or stop of the polishing machine, so as not to cause accidental injury. In the operation, to control the strength, to avoid excessive force caused by accidents.

2. Equipment maintenance:

Regular maintenance and maintenance of the burr polishing machine to keep the performance of the equipment good. Clean the dust and dirt on the surface of the device, check whether the components are loose or worn, and repair or replace them in time. Avoid using expired or damaged grinding wheels and sandpaper, so as not to affect the polishing effect and safety performance.

3. Workpiece processing:

Before polishing, the workpiece must be properly pre-treated, such as removal of rust, oil and attachments. The surface of the workpiece should be smooth and clean to ensure the polishing effect and quality. If the workpiece is too large or too heavy, it is not suitable to use a burr polishing machine for processing, and a more suitable equipment or method should be selected.

4. Environmental protection:

In the use of burr polishing machine, pay attention to prevent the spread of dust and waste. Dust cover can be placed around the equipment or a dust suction device can be connected to reduce environmental pollution and health risks. At the same time, timely cleaning and treatment of waste and wastewater, to keep the work site clean and tidy.

5. Technical requirements:

Burr polishing machine requires operators with certain professional knowledge and technical experience. Before operation, it is necessary to fully understand the material, shape and polishing effect of the workpiece to be achieved, and select the appropriate process parameters and grinding wheel type. According to different workpieces and requirements, different polishing methods and steps can be used to obtain good processing results.

The above is the use of burr polishing machine and precautions, I hope to help you. When in use, be sure to comply with the operating procedures and safety requirements to ensure the safety of the operator and equipment, while obtaining high-quality polishing results.