Aluminum deburring machine is a device used to remove burrs on the surface of aluminum parts. The following will briefly introduce the use of aluminum deburring machine and precautions.

First, the use of aluminum deburring machine:

1. First of all, place the aluminum part to be removed on the work table of the aluminum part deburring machine, and fix the aluminum part to ensure that it is stable and will not shake.

2. Confirm the spacing between the workbench and the tool, and maintain the appropriate working pressure of the tool. Adjust the position and Angle of the tool so that it maintains a certain contact Angle with the surface of the aluminum parts, and ensure that the contact area between the tool and the aluminum parts is uniform.

3. Turn on the power switch of the aluminum deburring machine and start the device. Adjust the speed and working mode of the tool according to the need (usually there are two ways of one-way and two-way) to ensure that the tool rotates normally and exerts the appropriate force on the surface of the aluminum.

4. Gradually move the aluminum parts so that the tool touches the burr part of the surface of the aluminum parts in turn. Use a uniform moving mode, not too fast or too slow, to ensure the uniformity and consistency of the deburring effect.

5. After a period of deburring treatment, check the burrs on the surface of the aluminum parts as needed. If there are burrs that are not removed, the position and Angle of the tool can be adjusted appropriately for secondary treatment until satisfactory.

6. When the deburring work is completed, turn off the power switch of the aluminum deburring machine, and clean the aluminum chips and other impurities on the surface of the workbench and tools in time.

Second, the attention of aluminum deburring machine:

1. When using aluminum parts to deburring, ensure that the operator wears personal protective equipment, including goggles, gloves, and protective clothing, to prevent debris and aluminum chips from harming the human body.

2. When operating the aluminum deburring machine, pay special attention to the safety of fingers and other body parts. Do not place your fingers between the tool and the aluminum parts to avoid accidental injury.

3. Before using the aluminum deburring machine, it is necessary to understand the burr situation on the surface of the aluminum parts, and choose the appropriate tool and working mode according to different situations. Different shapes and sizes of aluminum parts may require different tools and process parameters.

4. Be careful when adjusting the position and Angle of the tool to avoid additional scratches or damage to the surface of the aluminum parts. A small piece of scrap can be tested first to confirm the suitability of the tool position and Angle before operating the actual aluminum part.

5. When moving aluminum parts, it is necessary to maintain a uniform and stable movement to avoid being too fast or too slow, so as not to affect the deburring effect. It is also necessary to pay attention to the control of strength, and avoid being too large or too small to ensure the consistency of the deburring effect.

6. If the tool is no longer sharp or the effect is not good during the deburring process, the tool should be replaced or trimmed in time to ensure the good working condition of the tool to ensure the quality and efficiency of the aluminum deburring.

7. Regularly maintain and maintain the aluminum deburring machine, clean the aluminum chips and other impurities on the surface of the tool and equipment, check the running status of the power supply and mechanical parts, and ensure the normal operation of the equipment.

In short, aluminum deburring machines play an important role in removing burrs on the surface of aluminum parts. Proper use and strict observance of precautions can effectively improve the deburring effect and ensure the quality and safety of aluminum parts.